Small-size eight-channel flaw detector of “Scanner+” series – “Skaruch” model (UMU “Skaruch”) is designed for prompt detection and characterization of defects of weld joints and base metal of pipelines, containers and metal structures. UMU “Skaruch” allows nondestructive inspection of metal, polyethylene, plastic, ceramics quality.
The availability of 8 channels for UMU “Skaruch” and possible choice between 16 diff erent inspection schemes allows application of the unit as part of multichannel sets for semiautomatic and automatic inspection. UMU “Skaruch” passed the state testing and has good feedback from the companies of diff erent branches. UMU “Skaruch” is certifi ed by RF State Committee for Standardization, Metrology and Certifi cation, registered in the state register of measuring equipment (No. 15723-02) and admitted for use in the Russian Federation. The certifi cates of CIS countries are available. The application method of UMU “Skaruch” is approved by Russian Federal Service for Ecological, Technical and Atomic Supervision and permitted for use in inspected sites. Learn more »
Portable multichannel flaw detector – thickness gauge AUMU “Scanner” is the basis for establishment of small areas of automatic high-speed ultrasonic inspection in production fl ow for diff erent products. Depending on inspection purpose the detector may have up to 9 independent channels.
Nondestructive inspection and thickness gauging of weld joints and base metal of products is performed at a speed of up to 2 m/s. Learn more »
Small-size ultrasonic flaw detector “Skaruch-PV1” – manual device for underwater inspection of weld joints and base metal quality with diving depth of up to 60 m. “Skaruch-PV1” detector has air- and shockproof housing and equipped with remote display. Eight-channel ultrasonic inspection unit UMU “Skaruch-PV1” allowing scanning inspection of weld joints and base metal of underwater sections of pipelines, is made on the basis of “Skaruch-PV1” detector. Learn more »
Multichannel detector – thickness gauge AUMU “Scanner” is the basis for establishment of automatic lines of high-speed ultrasonic inspection in production fl ow for diff erent products: pipes, sheets, discs, rings, shafts, pistons etc., metal structures and other products’ blanks.
Depending on inspection purpose the flaw detector may have up to 32 independent channels. Nondestructive inspection and thickness gauging of weld joints and base metal of products is performed at a speed of up to 2 m/s. Learn more »