Manual ultrasonic equipment


UN-1 – device for ultrasonic lap welds

UN1-unit for ultrasonic lap welds

An ultrasonic flaw detector for examining lap welds, consisting of two P121 – 5 – 45° ultrasonic converters and a mechanical accessory with a guide rail and fixing screw. The ultrasonic examination techniques used are mirror-shadow and echo methods. The method is approved by Rostechnadzor of Russia.


UP-1 – device for ultrasonic welds crosshairs

UP-1 – device for ultrasonic welds crosshairsDevice for ultrasonic welds crosshairs UP1-M
An ultrasonic flaw detector for examining weld joint crosses or detecting transverse-oriented defects in welded joints, and consisting of two P121 – 5 – 70° ultrasonic converters and a mechanical accessory with a guide rail and fixing screws. The ultrasonic examination configurations used are symmetrical and asymmetrical “Duet”.

 


UMBT-1 – mechanical device for ultrasonic drill pipe

 

UMBT-1 – mechanical device for ultrasonic drill pipe

A mechanical device for the ultrasonic examination of drill pipes Ø60–168 mm with a set of aperture-contact converters:

  • P321 – 2,5 – 73SЩК° , P321 – 2,5 – 68SЩК: ultrasonic examination of threaded part of tool joint and base metal of pipes (detection of cracks);
  • P321 – 2,5 – Ø5/2ЩК: ultrasonic examination of base metal (detection of corrosion)
  • P311 – 2,5ЩК°, P321 – 2,5 – 60ЩК: ultrasonic examination of threaded part of tool joint from the thrust shoulder side (without use of the device).